NS0-515 Online Practice Questions and Answers

You are cabling drive expansion shelves for an E2800 storage system.

In this scenario, which cabling method should you use?

A. You use SAS expansion port EXP1 and reserve SAS expansion port EXP2 for a second drive expansion stack.

B. The controller A and the controller B SAS expansion ports (EXP1 and EXP2) should be divided between the A-side and B-side IOM-12 modules for all the expansion shelves.

C. You use SAS expansion port EXP2 and reserve SAS expansion port EXP1 for a second drive expansion stack.

D. The controller A and the controller B SAS expansion ports (EXP1 and EXP2) should not be divided between the A-side and B-side IOM-12 modules for all of the expansion shelves.

Which two local users of NetApp SANtricity Unified Manager would be used to edit the Certificate Management section? (Choose two.)

A. storage

B. support

C. security

D. admin

What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)

A. FC

B. SAS

C. IB

D. iSCSI

An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.

In this scenario, which statement is correct?

A. Remove the mirroring relationship on the orphan, then re-create the mirroring relationship

B. Suspend mirroring operations on the orphan, then resume operations

C. Deactivate the mirror consistency group that contains the orphan, then re-enable the group

D. Perform a role change on the orphan, then re-create the mirroring relationship

A customer has an E5760 array with a 30-drive Dynamic Disk Pool (DDP) that uses 800 GB SSD drives. The customer needs to expand the pool by one drive but has only a 1.6 TB SSD drive available.

In this scenario, what happens when the customer attempts to add the 1.6 TB drive to the existing pool?

A. The pool is expanded by 1.6 TB

B. The pool is expanded by 1.6 TiB

C. The pool is expanded by 800 GB

D. An error occurs, and the add fails

Which three documents should be provided to the customer after the E-Series installation is complete? (Choose three.)

A. a document showing how much space is available for system expansion

B. a document showing the cabinet layout with cabling information and IP addresses being used

C. a document showing user IDs and passwords for all deployed devices

D. a document with IMT pages that show the supported host configuration and fabric switches in the solution

E. a document showing available power on the UPS with no equipment connected

An administrator is asked to migrate two DE6600 shelves into a newly deployed E5760 environment that is configured with a stack of two DE460C shelves.

In this scenario, how does the administrator complete this task?

A. Cable the DE6600s at the beginning of the stack

B. Cable the DE6600s into a separate stack

C. Cable the DE6600s at the end of the stack

D. Cable the DE6600s between the DE460C shelves

What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two.)

A. Set at the factory, based on the order

B. Change the QSFP type in the HIC

C. Change the Feature Pack in the SANtricity System Manager

D. Set in the Hardware tab using SANtricity System Manager

Which data protection strategy has the most overhead capacity as a percentage of the total capacity?

A. RAID 10

B. RAID 6

C. RAID 5

D. Dynamic Disk Pools (DDP)

A company is using the Federal Information Processing Standard (FIPS) on all volume groups. However, one volume group failed a security audit.

In this scenario what would cause a volume group to fail the security audit?

A. An FDE drive was added as a spare in the volume group

B. Data Assurance was changed to "disabled" for the volume group

C. The Secure Erase operation was applied to the volume group disks

D. Connectivity to the key server was interrupted