NS0-162 Online Practice Questions and Answers

Exhibit.

A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3. Referring to the exhibit, what is the problem?

A. The host IP address does not match the export policy rule.

B. The volume is in read-only.

C. The volume is not mounted In the namespace.

D. The logical Interface does not allow the NFSv3 protocol.

Exhibit

After creating a new LIF called datalif1 on SVM vs0, you notice connectivity issues to the newly created LIF, as shown In the exhibit. You have verified that the new LIF Is online and the network team is able to see the MAC address on the switches.

Referring to the exhibit, what would cause connectivity Issues?

A. The home port needs to be modified to port e0d.

B. The route metric needs to be modified to a metric of 30.

C. The route needs to be modified to reflect the correct gateway.

D. The netmask needs to be modified to a /16 network.

You have a 4-node cluster with a NetApp AFF A400 HA pair and a NetApp FAS8700 HA pair running NetApp ONIAP 9.8 software. You are required to set up 2-factor authentication for the ONTAP CU. Which two authentication methods are required in this scenario? (Choose two.)

A. public key

B. Security Assertion Markup Language (SAML)

C. IP security (IPsec)

D. password

You have an AFF A400 HA pair serving SMB locally and a FAS8300 HA pair serving SMB over FlexCache Both clusters are running ONTAP 9.8 software. In this scenario, which two protocol features are supported at the remote cache? (Choose two.)

A. multiprotocol NFSv4.1

B. file locking

C. multiprotocol NFSv3

D. SMB3 continuously available (CA) shares

A company has three servers that are using the iSCSI protocol to connect to a 2 node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. When you check the ONTAP cluster, you notice that the servers are togging into only the first controller.

Which two steps do you take to troubleshoot the issue? (Choose two.)

A. Verify that the UFs are up.

B. Verify that the ISCSI data protocol has been enabled on the ports.

C. Verify that each server has been rebooted.

D. Verify that the controller has not been taken over.

You have commissioned a new AFF A250 MetroCluster over IP configuration. Your company requires an automatic switchover to the surviving site In case of a site disaster. What do you need to configure to fulfill this requirement?

A. cluster failover

B. ONTAP Mediator service

C. storage failover

D. automated unplanned switchover

You have deployed an ONTAP C190 cluster enabled with the iSCSI protocol. Your manager asks for available options to protect the data on your cluster using the native SnapMirror technology. In this scenario, which two products would satisfy this request? (Choose two.)

A. ONTAP Select

B. Cloud Volumes ONTAP

C. Cloud Volumes Service for AWS

D. Azure NetApp Files

Your company wants to Increase access security In both their NFS and ISCSI environments. Currently ISCSI Is not authenticated and NFS relies only on export policies for security. Which two enhancements do you use to satisfy this new criteria? (Choose two.)

A. Enable Kerberos for NFS exports.

B. Enable Kerberos for iSCSI LUN access.

C. Enable Challenge-Handshake Authentication Protocol (CHAP) for NFS exports.

D. Enable Challenge-Handshake Authentication Protocol (CHAP) for ISCSI LUN access.

Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

A. FC has not been licensed on the cluster.

B. NVMe Is not configured for the SVM.

C. FC switch zoning has not been done correctly.

D. NVMe is not licensed on the cluster.

You need to configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster. Your company does not have Key Management Interoperability Protocol (KMIP) services available but must require a passphrase to be entered when a node Is rebooted.

In this scenario, which two actions should be performed to satisfy these requirements? (Choose two.)

A. Configure an external key management server.

B. Enable onboard key management.

C. Enable cluster-wide FlPS-compliant mode.

D. Enable common criteria mode.