ISS-003 Online Practice Questions and Answers

An Intel Server Board S2600WT2 has been assembled and powered on; however, the status LED on the front panel blinks with an amber colour which means a non-critical alert has occurred. Which of the following might be the BEST way to find the reason for this alert?

A. Listen to beep code and look for it in TPS.

B. Look up ERROR MANAGER in the BIOS.

C. View POST LED code and look for it in TPS.

D. View the SEL log.

A reseller would like to confirm that the chassis fans for an Intel Server Chassis are connected to the correct headers on the installed Intel Server Board. Which of the following documentation could be used to obtain this information?

A. The Quick Start Guide for the Intel Server Board shows the required connections.

B. The TPS for the Intel Server Chassis will contain details for the fans included in the specific chassis.

C. The technical specifications of the Intel Server Board will show the proper connections.

D. The TPS for the Intel Server Board will contain details for the fan headers for the specific server board.

What speeds do the integrated Ethernet controllers (LOM) support, in the current generation Grantley (S2600 series boards for Intel Xeon E5v3 series CPUs)? (Select ALL that apply).

A. 1 Gb/s

B. 2.5 Gb/s

C. 5 Gb/s

D. 10 Gb/s

E. 15 Gb/s

F. 40 Gb/s

You have spent a long time with your customer on determining the right size server for their new

operations. You now recommend that they log into Intel.com to use an online tool that will give them a lot

of this information. You advise that a good place to start is using the Intel .

Please select the correct answer below.

A. Server builder wizard

B. Configurator Wizard

C. IT Server Sizing tool

D. System Sizing configurator

Your customer calls you to say that their dual socket server is reporting only half the memory that they originally purchased, and further that not only does the internal RAID card not show up, but they can't find any of the SAS drives that they purchased. How would you advise your customer?

A. Pay the customer a visit to carry out a physical check on the server.

B. Advise the customer to do an RMA on the RAID controller and half the memory, as this is clearly the problem

C. Advise the customer to swap out the RAID controller with a known good one, ensuring that appropriate ESD precautions are observed

D. Advice the customer to do an RMA on the entire server as it is clearly damaged.

E. Check to ensure both CPU sockets are populated.

F. Ensure that the customer swaps out all the memory, one by one, with known good ones, ensuring that appropriate ESD precautions are observed

Which of the following RAID levels should an Intel Server Specialist recommend to a customer who must have the highest reliability available, but only has room for four hard drives?

A. RAID 1

B. RAID 5

C. RAID 6

D. RAID 10

On an Intel Server Board S2600WT, which of the following is the MAXIMUM possible memory speed that can be reached when the system is configured with 24 DIMMs and 2 Intel Xeon?Processors E5- 2600 v3?

A. 2133 MHz

B. 1333 MHz

C. 1600 MHz

D. 1866 MHz

A customer wants to buy an Intel server system in a 1U rack chassis for a web server with Intel Intelligent Node Manager support. Which of the following systems support this feature?

A. The Intel Server System P4308RPLSHDR

B. The Intel Server System R1304RPSSFBN

C. The Intel Server System R1304BTSSFAN

D. The Intel Server System P4304BTSSFCN

You are explaining to a potential customer the benefits of having an embedded web server in the BMC of their R2224WTTYS system, and how using the TAB >server health >sensor readings enables monitoring of many onboard devices as a way of reducing failure and promoting continuous server uptime. You have elected to give him a list of some of the items that are continuously monitored by the BMC. Please choose those that are monitored. (Select ALL that apply).

A. HDD storage capacity

B. System Fan speeds in RPM

C. CPU threads and VR usage in amps

D. Exhaust Air temperature 0C

E. Memory capacity

F. CPU Name and model number

G. CPU VR Temperature in 0C

H. System Airflow in CFM

I. CPU TDP

J. Front panel temperature in 0C

Which of the following applies to the term Unified Data Centre Fabric? (Select ALL that apply).

A. A convergence of different network protocols, such as iSCSI and FCoE to integrate seamlessly into an existing infrastructure.

B. SAN connectivity to all servers using FCoE without the need to invest in dedicated fibre channel HBAs or a secondary infrastructure.

C. iSCSI storage dedicated to each server in the fabric.

D. Data Centre Bridging does not allow lossless traffic via Ethernet making it suitable for SAN traffic.

E. NAS connectivity for each of the connected servers in the fabric.