HQT-4120 Online Practice Questions and Answers

A customer wants to change a production RAID group from RAID 5 (7D+1P) to RAID 6 (6D+2P) on a VSP

G600 during normal operations. They have just unmapped the LUNs from the channel ports.

What needs to be performed next?

A. Parity groups must be deleted.

B. The RAID level must be changed in Storage Navigator.

C. The RAID level in the SVP Maintenance window must be changed.

D. The RAID 5 group must be put into DRU mode in Storage Navigator.

Which Interfacing software gets Installed in the Maintenance PC (MPC) on a VSP Gx00 system?

A. Device Manager - Storage Navigator

B. Hitachi Command Suite

C. Block Element Manager

D. Hitachi Command Director

What are two available methods to perform storage provisioning and configuration using RAID Manager/ CCI? (Choose two.)

A. in-band using FC

B. CU using the SVP

C. Storage Navigator CLI

D. out-of-band using TCP/IP

Which two actions can be performed with the Block Element Manager (BEM) on the VSP Gx00 series? (Choose two.)

A. Generate a configuration report.

B. Configure the SVP.

C. Generate license keys.

D. Set front-end port parameters.

You need to replace a part in a VSP G800.

What are three ways for you to invoke the Maintenance Utility? (Choose three.)

A. using the GUM

B. using the HM800 SRT tool

C. from Hitachi Command Suite

D. in the HM800 maintenance wizard

E. from the MPC connected to the Maintenance LAN port on the array

From which two locations can the Maintenance Utility be Invoked on a VSP G800? (Choose two.)

A. the SVP Web Console

B. Hitachi Command Suite (HCS)

C. Hitachi Infrastructure Director (HID)

D. MPC connected to the Maintenance LAN port on the array

Which two mechanisms are used to maintain redundancy after a disk failure? (Choose two.)

A. quick copy

B. correction copy

C. dynamic sparing

D. emergency destage

You have just completed a firmware upgrade on a VSP G600.

Under which Hitachi Device Manager - Storage Navigator tab can you confirm the version number of the

newly upgraded firmware?

A. View

B. Actions

C. Reports

D. Maintenance Utility

What would be the recommended RAID level to be used to create an HDP pool?

A. RAID 1

B. RAID 1+0

C. RAID 5

D. RAID 6

You are installing six VSP Gx00 systems at a customer site.

Whichtool allows you to apply the licenses to all the systems at the same time?

A. Initial Setup Tool

B. Device Manager - Storage Navigator

C. SVP Web Console

D. HCS License Key Management System