HPE6-A80 Online Practice Questions and Answers

A network architect needs to plan quality of service (QoS) for a hospital network. Which of these applications should receive the highest priority?

A. streaming IPTV in lobbies

B. cloud-based scheduling software

C. MRI image transfer

D. wireless voice communicator devices

Refer to the exhibit.

The exhibit shows the current AP deployment in a school. This customer indicates that the current wireless performance is inadequate and w B02.11ax. For the new' solution, what should the network architect recommend?

A. APs deployed in rooms with a density-based design

B. APs deployed in similar locations, but with dual 5 GHz radios

C. APS deployed in similar locations, but with higher gain antennas

D. APs deployed in hallways with about twice the density

Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the

celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.

The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that

employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.

The architect has selected AP-515S. About how many APs should the architect propose?

A. about 13-16

B. about 23-32

C. about 6-8

D. about 6-4

Refer to the exhibit.

The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in

the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.

The customer has indicated that it has these VLANS for user devices.

*

VLAN 11 for Floori employee wired devices

*

VLAN 12 for Floor 2 employee wired devices

*

VLAN 13 tor Floor 3 employee wired devices

*

VLAN 14 for Floor 4 employee wired devices

*

VLAN 15 for Floor 5 employee wired devices

*

VLAN 101 for all employee wireless devices

*

VLAN 102 for all guest wireless devices

In which locations should the architect plan the VLANs?

A.

VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)

B.

VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)

C.

VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC

D.

VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.

A network architect plans to propose a virtual Mobility Master (VMM) tor a new solution.

The solution will support up to 4.800

wireless client devices and include:

*

two Virtual Mobility controllers (VMCs) in a cluster

*

180 APs

Which licenses should the architect propose?

A.

1 MM-VA-500; 2 MC-VA-250; 540 Enterprise licenses

B.

1 MM-VA-1K; 2 MC-VA-25Q; one Enterprise license

C.

1 MM-VA-IK:I MC-VA-250; 180 Enterprise licenses

D.

1 MM-VA-500; 1 MC-VA-250; 180 Enterprise licenses

The architect plans to recommend an upgrade to Aruba CX switches What is one requirement for the new solution that justifies this recommendation?

A. the requirement to support secure IPsec tunneling at the aggregation layer

B. the requirement to support larger ARP tables at the aggregation layer

C. the requirement to support smart Rate at the access layer

D. the requirement to support tunneled-node at the access layer

A customer has an Aruba solution with APs, MCs, and an MM The customer also uses AirWave and ClearPass. The customer wants to add Aruba CX Switches, which use per- user tunneled node, to the solution. How should the Aruba CX Switches integrate with the existing solution in order to determine when to tunnel device traffic to MCs?

A. They should be managed by AirWave with SNMPv3.

B. They should implement authentication to ClearPass.

C. They should be directed to MCs by a DHCP or DNS server.

D. They should be manually added as MDs in MM.

A retailer currently has two redundant ClearPass C2000 0L36O Gen9 hardware appliances and two perpetual 1K Access licenses. The customer uses ClearPass to authenticate employee wireless devices and other corporate wireless devices. ClearPass togs indicate that, peak license usage is currently 1900.

The customer now wants to add a guest access solution. Guests will connect to an open SSiD and be redirected to a portal which they can use to self-register and log in. The customer anticipates that up to f 550 guest devices will connect at the same time.

The customer requires the most cost-effective solution that will meet the requirements. What should the network architect recommend for this solution?

A. IK + 500 Access licenses: IK + 500 Guest licenses

B. 1K + 500 Access licenses; Two 1K Onboard licenses

C. 1K + 500 Access licenses

D. Two 1K Guest licenses

Refer to the exhibit.

A customer needs a wired network upgrade and has complained about performanceissues. The architect collectedinformation about traffic now on several switch ports in different locations across the network, and the results are shown inthe exhibit. Each of these ports is a 1Gbps port.

What can the architectconclude?

A. All of the ports show serious congestion

B. Port 1 shows periods of congestion; other ports are not congested.

C. Port 3 snows periods ofcongestion; other ports are not congested.

D. None of these ports show any periods of congestion

Refer to the exhibit.

A customer has the wined infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services They will now add a new wireless solution, with mobility controllers (MCs) connected as shown. The new

wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must provide seamless roaming across the entire campus.

After the new deployment, both wired and wireless devices experience IP connectivity issues.

Which change to the existinginfrastructureshould the architect recommend to support all of the customer requirements?

A. The wired VLANS should be combined into a single VLAN and n6 subnet

B. The core switches should be replaced with switches that have larger ARP tables.

C. The MCs should be moved to the aggregation layer, and more MCs added

D. The core and aggregation switches should disable Virtual Switching Framework (VSF).