HPE6-A79 Online Practice Questions and Answers

HOTSPOT

A network administrator wants to receive a warning level alarm every time the noise floor rises above -82 dBm on any of the AP radios.

Which alarm definition must the network administrator create to accomplish this?

Hot Area:

A customer wants a WLAN solution that permits Aps to terminate WPA-2 encrypted traffic from different SSIDs to different geographic locations where non-related IT departments will take care of enforcing security policies. A key requirement is to minimize network congestion, overhead, and delay while providing data privacy from the client to the security policy enforcement point. Therefore, the solution must use the shortest path from source to destination.

Which Aruba feature best accommodates this scenario?

A. Inter MC S2S IPsec tunnels

B. RAPs

C. Multizone Aps

D. VIA

E. Inter MC GRE tunnels

Refer to the exhibit.

Based on the output shown in the exhibit, which wireless connection phase has just completed?

A. L3 authentication and encryption

B. MAC Authentication and 4-way handshake

C. 802.11 enhanced open association

D. L2 authentication and encryption

Refer to the exhibit.

A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the "Radius" server group.

What must the administrator do next in order to achieve this goal?

A. Use the "Radius" server group as the RADIUS Accounting Server Group in the AAA profile.

B. Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.

C. Use the "Radius" server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.

D. Use the "Radius" server group as the RFC 3576 server in the AAA profile.

A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.

What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?

A. Map the four physical ports to port channel 0.

B. Disable spanning tree and allocate unique VLANs to each port.

C. Manually set 10Gbps speeds on all ports.

D. Configure the same MSTP region that the switches have.

E. Make all ports trunk interfaces and permit data VLANs.

Refer to the exhibit.

A network administrator wants to configure an 802.1x supplicant for a wireless network that includes the following:

AES encryption EAP-MSCHAP v2-based user and machine authentication Validation of server certificate in Microsoft Windows 10

The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additional Settings.

What must the network administrator do next to accomplish the task?

A. Change default RC4 encryption for AES.

B. Enable user authentication under Settings

C. Change the security type to Microsoft: Smart Card or other certificate.

D. Enable server certificate validation under Settings.

Refer to the exhibit.

A network administrator wants to allow contractors to access the WLAN named EmployeesNet. In order to restrict network access, the network administrator wants to assign this category of users to the contractor user role. To do this, the

network administrator configures ClearPass in a way that it returns the Aruba-User-Role with the contractor value.

When testing the solution, the network administrator receives the wrong role.

What should the network administrator do to assign the contractor role to contractor users without affecting any other role assignment?

A. Check the Download role from the CPPM option in the AAA profile.

B. Set contractor as the default role in the AAA profile.

C. Create Contractor firewall role in the M.

D. Create server deviation rules in the server group.

Refer to the exhibit.

A network administrator has Mobility Master (MM) - Mobility Controller (MC) based network and has fully integrated the MCs with ClearPass for RADIUS-based AAA services. The administrator is testing different ways to run user role derivation.

Based on the show command output, what method has the administrator use for assigning the "corp" role to client with MAC xx:xx:xx:xx:xx:xx?

A. Dynamic Authorization using VSA attributes.

B. Dynamic Authorization using IETF attributes.

C. Server Derivation Rules using IETF attributes.

D. User Derivation Rules using the client's MAC.

Refer to the exhibit.

A network administrator is evaluating a deployment to validate that a user is assigned the proper role and reviews the output in the exhibit. How is the role assigned to user?

A. The MC assigned the role based on Aruba VSAs.

B. The MC assigned the machine authentication default user role.

C. The MC assigned the default role based on the authentication method.

D. The MC assigned the role based on server derivation rules.

Refer to the exhibit.

After deploying several cluster pairs, the network administrator notices that all APs assigned to Cluster1 communicate with MC1 instead of being distributed between members of the cluster. Also, no IP addresses are shown under the Standby IP column.

What should the network administrator do to fix this situation?

A. Apply the same cluster profile to both members.

B. Enable Cluster AP load balancing.

C. Rename the cluster profile as "CLUSTER1".

D. Place MCs at the same hierarchical group level.