HPE2-T34 Online Practice Questions and Answers

HOTSPOT

A solution architect needs to review the warning statuses before progressing their Synergy deployment. Where should the solution architect click on the HPE OneView interface to view the outstanding server alerts?

Hot Area:

DRAG DROP

Match the HPE OneView interconnect module state to its definition.

Select and Place:

DRAG DROP

Match the HPE OneView element to its function.

Select and Place:

Where can an administrator select the firmware baseline for a specific Synergy compute node?

A. Logical Interconnect Group

B. Server Profile

C. Image Streamer

D. Intelligent Provisioning

A customer has deployed the HPE OneView virtual appliance and is getting an error message when they attempt to import a Synergy frame for management. What is the most likely cause of the problem?

A. Synergy frames require additional HA requirements for the virtual appliance.

B. Synergy frames are managed by the HPE Composer.

C. The backup IPv6 address of the Frame Link module was used during the import.

D. The HPE OneView virtual appliance has the wrong database size.

A customer creates a server profile template with two new volumes. The first is an 8 GB LUN for the boot drive. The second is a 500 GB LUN for the ESXi cluster shared storage. After the server profiles are assigned to the servers they each

have an 8 GB drive and a 500 GB drive but the 500 GB drive isn't shared across the member nodes within the cluster.

What is the most likely problem with the Server Profile Template?

A. Mapping multiple LUNs aren't supported with HPE OneView Server Profile Templates.

B. Both volumes were created as Private.

C. The incorrect logical disk type was selected.

D. ESXi can't share drives created dynamically via HPE OneView.

What tool can you use to provision hosts using server profiles to create or grow a Hyper-V cluster?

A. HPE Insight Control Server Provisioning

B. HPE OneView for Microsoft System Center

C. HPE iLO Virtual Media

D. Microsoft Operations Manager

A customer is interested in monitoring the hardware health of server blades in a c7000 enclosure equipped with Comware switches, and also wants to use iLO remote console. Which licensing option can you recommend as the lowest price level?

A. HPE OneView Advanced without iLO Advanced

B. HPE OneView Standard and iLO Advanced

C. HPE OneView Advanced with iLO Advanced

D. HPE OneView Standard and iLO Standard for BladeSystem

Your customer has multiple c7000 enclosures that will be managed using HPE OneView. At what stage is the license type selected for the enclosures?

A. after enclosure is updated to the selected firmware baseline

B. when adding the enclosure to the HPE OneView

C. when at least one profile is created for this enclosure

D. after all components are properly discovered in HPE OneView

Which HPE OneView feature enables the detection of lost Ethernet connectivity on interconnect uplink ports?

A. QoS

B. M-LAG

C. Smart Link

D. VxLAN