HPE0-J80 Online Practice Questions and Answers

You present an HPE 3PAR StoreServ 8450 all-flash solution to a customer's C-level management.

Which HPE 3PAIR technologies should you focus on to convince the CIO that your proposed solution is more cost-efficient competitor products? (Select two.)

A. thin deduplication

B. adaptive sparing

C. express writes

D. virtual copy

E. virtual domains

As part of solution tuning, you want to add online, application-consistent snapshots to a customer's environment.

Which tasks must be performed? (Select two.)

A. Delete the snapshot

B. Stop the VM

C. Release file locks

D. Flush the buffers

E. Quiesce the file system

Which additional value should you focus on during a solution presentation for an HPE 3PAR StoreServ system using 3.84 TB cMLC SSD drives to appeal to the interests of the company's CFO?

A. savings of the solution when compared to a similar configuration using 10 k SAS drives

B. savings of the solution when compared to 1.92 TB cMLC SSD

C. performance gain when compared to 1.92 TB cMLC SSD

D. savings of the solution, which approaches the cost of 15 K SAS drives

The demonstration of iSCSI Persistent Ports during an HPE 3PAR StoreServ proof of concept fails. What is a possible cause of failure?

A. The connected switch gets a loss_sync of the HPE 3PAR StoreServ port and disconnects the port immediately.

B. The connected switch does not accept an unsolicited ARP and does not update the IP address mappings.

C. Zoning is not implemented correctly, and the host could not connect to the partner port.

D. Port Persistence is not configured correctly, so the partner port could not be activated in a timely manner.

Which HPE backup product enables data-at-rest encryption?

A. HPE Enterprise Secure Key Manager

B. HPE StoreOnce, using the Catalyst Store

C. HPE StoreOnce Security Pack

D. HP Library and Tape Tools

You are planning an HPE StoreVirtual architecture based on a customer's physical site configuration. The customer has two physical sites and wants to span the cluster between them and requires that all sites should be peers.

What should be done to meet this customer's requirements?

A. Configure a Failover Manager in each physical site.

B. Configure the cluster to span both sites, and configure one site as primary site.

C. Create an additional logical site at each physical site with a Failover Manager.

D. Create a logical third site to provide a Failover Manager.

When comparing competitor solutions with your HPE 3PAR StoreServ solution design, which features should you compare?

A. technology, strengths threats

B. mesh architecture, ASIC, manageability

C. cost, complexity, openness

D. fixed cache, services cost

A customer's business needs 247 uptime and highest data availability. In the past, the customer has experienced revenue loss from several outrages during firmware upgrade processes with non-HPE products due to temporary loss of access to disk enclosures. There is a need for 80 TB of Tier-0 storage. You propose cage availability in the new design, using an HPE 3PAR StoreServ 2-node system containing

80.92 TB cMLC SSD drivers.

When following HPE best practices, how many additional enclosures should be included in the system?

A. 0

B. 1

C. 2

D. 3

Which information should be collected and analyzed when discovering customer expectations for replication performance? (Select two.)

A. rate of data change

B. bandwidth

C. type of data

D. latency

E. frequency of copies

When designing an HPE StoreOnce POC with Catalyst using Symantec NetBackup, you need to know which products require licenses.

Match each product to its licensing requirements

Select and Place: