DES-6322 Online Practice Questions and Answers

What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

A. FQDN for vCenter Server Host name for VxRail Manager

B. Host name for both vCenter Server and for VxRail Manager

C. FQDN for both vCenter Server and for VxRail Manager

D. Host name for vCenter Server FQDN for VxRail Manager

How should an administrator manually validate the DNS readiness of a customer network?

A. Run a traceroute to the DNS server

B. Generate a Network PEQ

C. Ping the default gateway of the management VLAN

D. Run nslookup on server FQDN and IP

What is the correct CLI command to collect only the vCenter logs on VxRail Manager?

A. vc-support.sh –v

B. generateFullBundle.py –v

C. vc-support-bundle.sh –c

D. generateLogBundle.py –c

What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?

A. vSAN operates successfully

B. Network firewalls are configured correctly

C. vSAN has sufficient storage capacity

D. Network performance is sufficient

What guideline should be followed when planning bandwidth between sites hosting VM objects and the witness nodes?

A. 1500 MTU on the VSAN vmkernel interface

B. 5 ms with a recommended minimum bandwidth of 10Gbps

C. 2 Mbps for every 1000 objects on the vSAN

D. 500 ms roundtrip (< 250 ms one way)

What is a consideration when adding nodes to a VxRail G Series chassis?

A. G560 and G410 nodes are permitted in the same chassis

B. In a full G Series chassis, all nodes must have 10GbE ports

C. Hybrid and All-Flash nodes are permitted, if in different chassis

D. All nodes in a G Series chassis must be identical

What are the minimum requirements for a customer-supplied VDS in a VxRail deployment?

A. 2 uplinks Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN

B. 4 uplinks Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN

C. 4 uplinks Port groups for Discovery, Management, vMotion, and vSAN only

D. 2 uplinks Port groups for Discovery, Management, vMotion, and vSAN

Where can an administrator find steps to perform a manual verification of the customer network?

A. Customer Simplified Form

B. Dell EMC VxRail Network Planning Guide

C. Pre-Engagement Questionnaire (PEQ)

D. Dell Technologies SolVe Online

A planned VxRail Stretched Cluster will have four hybrid nodes at each site. What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?

A. Site disaster tolerance ?None keep data on Preferred (stretched cluster) Failures to tolerate ?1 failure ?RAID-1 (Mirroring)

B. Site disaster tolerance ?Dual site mirroring (stretched cluster) Failures to tolerate ?1 failure ?RAID-5 (Erasure Coding)

C. Site disaster tolerance ?Dual site mirroring (stretched cluster) Failures to tolerate ?No data redundancy

D. Site disaster tolerance ?Dual site mirroring (stretched cluster) Failures to tolerate ?1 failure ?RAID-1 (Mirroring)

An implementation engineer needs to validate the VxRail network configuration. Where can they obtain the NVT for VxRail?

A. Dell Technologies Central

B. Dell Technologies Information Hub

C. Dell VxRail Expert Channel

D. Dell VxRail Fast Pass