DES-6321 Online Practice Questions and Answers

A VxRail deployment has just been completed but the vSAN performance statistics are not available for the cluster or virtual machines. What is the reason for this situation?

A. Data has not been populated

B. Performance service has not been manually enabled

C. vSAN performance hot-fix has not been applied

D. Monitoring policy has not been created

What accurately describes VxRail scale-out rules?

A. Only the first 3 cluster nodes must be identical

B. Mixing hybrid and all-flash nodes is permitted when scaling greater than 32nodes with an RPQ

C. All G series models in a cluster must be identical

D. Only the first 4 cluster nodes must be identical

A company has a two chassis G Series cluster and wants to change the setup. This will require a reset of the chassis.

What is the correct procedure?

A. Reset both chassis simultaneously through the reset script

B. Reset the primary chassis first, followed by the secondary chassis, through the reset script.

C. Reset both chassis simultaneously with the mobile build server

D. Reset the secondary chassis first, followed by the primary chassis, through the reset script.

What software component is part of the VxRail Operations and Management Stack?

A. VMware vCenter

B. vRealize Automation

C. Secure Remote Services

D. vRealize Operations

How long is the grace period for the vSphere evaluation licenses in a new VxRail implementation?

A. 30 days

B. 45 days

C. 60 days

D. 90 days

After deployment, where would you look first on a VxRail v4 7 1xx Cluster for errors as they occur?

A. vCenter GUI

B. VxRail Manager GUI

C. marvin log

D. 1cm log

What statement accurately describes the tail types used in racking VxRail nodes?

A. Static rails only support the option to use a cable management arm (CMA)

B. Sliding rails are available on all models of Dell 14G VxRail nodes except for the S570

C. Static rails enable the VxRail nodes to be fully extended out of the rack for service

D. Sliding rails are available on all models of Dell 14G VxRail nodes except for the G560

Refer to the exhibit.

[Missing exhibit]

What does the Fabric ID shown on the GUI actually represent for the Switch Cluster personality profile?

A. Cluster ID

B. SmartFabric ID

C. Domain ID

D. Fabric ID

You have just upgraded a VxRail Cluster from version 4.5.x to version 4.7.x You need to ensure that new VxRail 4 7 x nodes will be discovered without having to make any changes to the nodes. What action should you take on the existing configuration?

A. Add a new VLAN to the ToR switches with ID 3939 In vCenter, set the VLAN ID of the VxRail Management distributed portgroup to 3939

B. In vCenter, set the VI.AN ID of the Management Network distributed portgroup to 3939

C. Add a new VLAN to the ToR switches with ID 3939 In vCenter, set the VLAN ID of the Management Network distributed portgroup to 3939

D. Add a new VLAN to the ToR switches with ID 3939

You receive the error "Invalid target datastore specified" while trying to deploy Doll EMC Secure Remote

Services.

What is the recommended course of action?

A. Rename the MARVIN-Virtual-SAN datastore to ESRS_VE.x86_64

B. Keep the SRS gateway powered for reference and redeploy manually

C. Delete the SRS gateway and redeploy using the manual method

D. Wait 10 minutes and try again