DES-4122 Online Practice Questions and Answers

DRAG DROP

Match each status LED indicator on the Dell EMC 14G PowerEdge server with its corresponding condition.

Select and Place:

CORRECT TEXT

For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.

A. No answer

B. Place Holder

C. Place Holder

D. Place Holder

CORRECT TEXT

You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.

A. No answer

B. Place Holder

C. Place Holder

D. Place Holder

A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.

Which setting should the technician change in Processor Settings in the System BIOS?

A. System Profile

B. Virtualization Technology

C. HyperThreading

D. Number of Cores per Processor

What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

A. Firmware: Upgrade to latest available version Configuration Apply always

B. Firmware Allow version upgrade only Configuration: Disabled

C. Firmware: Match firmware of replaced part Configuration Apply always

D. Firmware Disabled Configuration Apply only if firmware match

A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.

What action should a technician take to help accomplish this goal?

A. Configure servers to access the remote firmware repository

B. Enable the Match Firmware of Replaced Part setting in the system BIOS

C. Install and configure a repository manager

D. Enable the Collect System Inventory On Restart (CSIOR) attribute

A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials How could the technician change the iDRAC password?

A. SupportAssist Enterprise

B. iDRAC Web GUI

C. OpenManage Server Administrator

D. Virtual Console; press F2 after rebooting system

What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?

A. Flexibility to choose interconnects

B. Fixed networking card

C. Consume a PCIe slot

D. Provide a hot-swap component

Which card connects to the PCI bus, is physically smaller than a on the system board of a Dell EMC PowerEdge 14G server?

A. NDC

B. OCP

C. PCIe

D. FPGA

What is a characteristic of out-of-band management?

A. Dedicated device

B. Agent based

C. Less secure

D. Dependent upon OS