7003.1 Online Practice Questions and Answers

A customer with a Communication Server (CS) 1000E at Rls. 5.5 with two IPMG is upgrading the system to CS 1000E SA release 7 x. The second media gateway includes a media Gateway Controller card with one high density DSP daughter board.

How many voice channels does this configuration provide?

A. 32

B. 64

C. 96

D. 128

A customer has a Communication Server (CS) 1000E Rls. 7 x system with a System Manager as the primary Security Server that has been designated as a Deployment Server. The application file (.nai) has been uploaded to the deployment manager library. The customer has added an element to the security domain and wants to deploy software applications to the element. With respect to deployment services, which statement is false?

A. Deployment Manager has logicto prevent applications beingdeployed on unsupported hardware platform.

B. MAS application has its own separate .nai file.

C. IM and Presence application has its own separate .nai file.

D. MAS can be deployed on the same server as Session Manager.

A technician has deployed a Communication Server 1000 Rls. 7x system at their site. You are using the Virtual Terminal to access Communication Command line interface (CLI) to add telephone.

Which Overlays (LDs) are linked to eliminate the need for existing one Overlay (LD) and entering another one?

A. LD 10, 11, 15 and 20

B. LD 10, 11, 20 and 32

C. LD 10, 11, 20 and 30

D. LD 20 and 32

A customer purchased a new Communication Server 1000E SA system with five media gateways which includes:

MG 1: CPMG (Call Server, Signaling Server, Media Gateways Controller) MG 2: Media Gateway Controller MG 3: Media Gateway Controller MG 4: Media Gateway Controller MG 5: Media Gateway Controller

Which statement is true regarding the configuration of Media Gateway?

A. The Call Server and Media Gateway share the same ELAN IP address.

B. The Call Server, Signaling Server, and Media Gateway share the same ELAN IP address.

C. The Call Server and media gateway have different IP addresses.

D. The Call Server, Signaling Server, and Media Gateway have different IP addresses.

A technician has configured a new media gateway by connecting to the serial port for the MGC and entering network information for the card as well as the IP address for the Primary call server. When the MGC reboots, the faceplates displays UNRG. The Call Server console `IPMG registration denied'.

What should be done to solve this problem?

A. Ping from the MGC to the call server over the E-LAN

B. Check to ensure the TLAN cable for the MGC is connected and active

C. Check to ensure the IPMG has been configured on the call server

D. Power cycle the MGC card to force it to register

A technician is planning to upgrade a customer's existing Communication Server 1000E Rls. 6.0 system. During the upgrade, a CPPM server card from storage will be added to provide an additional signaling server.

Which two statements describes what must be done to the CPPM server card to distinguished it as a signaling Server (Choose two)

A. Set switch 5 to position 1.

B. Set switch 5 to position 2.

C. Install one Compact Flash Drive (RMD) and one Hard Drive (FMD)

D. Install one Compact Flash Drives (one RMD and one FMD)

A customer with a Communication Server (CS) 1000E Rls..5.5 with two IPMGs is upgrading their system to release 7 x. The Upgrade system will have two IP media Gateways.

Which two statements are true regarding DSP resources for the IP Media gateways in the Upgrade System? (Choose two)

A. DSP resources are no longer required for inter-IOMG calls.

B. DSP resources are localized to particular IPMG where the DSP resource is locted.

C. DSP resources are considered system resources and are not localized.

D. DSP resources are required for TDM to local calls

A technician is planning on upgrade of an option 11C 5 x system to a Communication Server (CS) 1000E Rls. 7 x System with CPMG Co-resident Call server and Media Gateway Controller.

To perform the Linux Base software installation on the CPMG which component is required?

A. Bootable Compact Flash (1 Gigabyte)

B. Bootable USB drive/disk (2 Gigabyte)

C. External CDROM drive

D. Bootable Compact Flash (2 Gigabyte)

A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis.

To complete the upgrade, which component in the Option 11C must be replaced?

A. SSC Card

B. Call Processor

C. Media Gateway

D. Digital Line Card

A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade.

What happens to the Terminal Number (TN) format during this upgrade?

A. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all assigned Terminal Numbers.

B. The TN format is automatically converted to the large system format of Card-Unit for all assigned Terminal Numbers

C. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all new programmed Terminal Numbers

D. The format is automatically converted to the large system format of Loop-Shelf-Card-Unit for IP phones only. All other devices assigned Terminal Numbers must be manually reprogrammed.