3V0-624 Online Practice Questions and Answers

You have been tasked with creating a vSphere 6.5 center design for an organization. The organization is currently evaluating vSphere network technologies that can be utilized with their existing infrastructure.

Evaluate each statement provided through requirements gathering and determine the network technologies that can be used to meet that requirement. The technology(s) chosen should be limited to what is needed to meet, but not exceed,

the given requirement.

Match Statements on the left by dragging the red buttons (S1-S6) over the text of the appropriate Solution.

NOTE: Statements can match more than one Solution or none at all.

Select and Place:

Power has just been restored to the data center after a catastrophic power failure. All storage and networks are back online.

In what order should the following systems be powered on?

Select and Place:

Which two types of workloads are efficiently consolidated when virtualized? (Choose two.)

A. Workloads that do NOT require user input and are constantly processing large amounts of batched data.

B. Workloads that will consume all available assigned resources.

C. Workloads that are NOT CPU bound; most of their time is spent waiting for external events such as user interaction.

D. Workloads that do NOT require access to specific physical resources such as a hardware dongle or graphics card.

In order to provide a critical service, a customer needs four virtual machines (VMs), each with 55GB memory reservation.

1.

This service must NOT experience an outage due to host hardware failures or host maintenance.

2.

The customer has ESXi hosts with 256GB of RAM each and, for business reasons, must run this service in a new ESXi host cluster.

Which VMware-recommended solution meets the stated requirements?

A. * Create an ESXi host cluster with 3 ESXi hosts.

* Enable HA and DRS on the ESXi host cluster.

B. * Create an ESXi host cluster with 2 ESXi hosts.

* Enable HA and DRS on the ESXi host cluster.

C. * Enable Fault Tolerance for the 4 VMs.

* Create an ESXi host cluster with 2 ESXi hosts.

D. * Enable HA and DRS on the ESXi host duster.

E. * Enable Fault Tolerance for the 4 VMs.

*

Create an ESXi host cluster with 3 ESXi hosts.

*

Enable HA and DRS on the ESXi host cluster.

A company is conducting a technology refresh and has requested assistance with a vSphere 6.5 design.

1.

The company has a corporate headquarters and two data centers strategically placed around the country, which provide the bulk of the computer power and storage for their customer-facing stores.

2.

The company requires each of its stores to be able to operate independently if connectivity is ever lost.

3.

Presently, all stores are configured differently and must be standardized as part of the technology refresh

4.

To support store operations, only a dozen applications are required.

5.

Any downtime during store hours could result in significant losses.

6.

Any proposed design must minimize cost.

What is a VMware-recommended option for this scenario?

A. VMware vSAN cluster with a minimum of three hosts

B. VMware vSphere cluster with low-cost iSCSI shared storage

C. VMware vSAN Stretched Cluster with nearest regional data center

D. VMware vSAN Remote Office Branch Office (ROBO) with two hosts

A company has historically used Auto Deploy without issue. They are now having issues with the PXE infrastructure. Which option can a systems architect recommend in the Auto Deploy design for better recoverability?

A. Boot from SAN and configure stateless caching.

B. Add SD card to hosts and configure stateless caching.

C. Add more CPU and RAM to DHCP and TFTP servers.

D. Add new NICs to hosts.

A company is consolidating its IT operations efforts by moving the Finance, IT, and QA departments towards a self-service environment, following SDDC best practices.

1.

All departments have different priorities and expectations for uptime of the required infrastructure and applications.

2.

Project stakeholders are still discussing final approvals for the budget wan the CFO.

3.

To drive down the operating cost of the environment, only blade servers will implement this project.

4.

To ensure business continuity, a colocation provider was chosen to fail over virtual machines.

5.

The implementation of the project will follow a public reference architecture provided by VMware.

What is the assumption in this scenario?

A. The chosen architecture is sufficient.

B. All departments demand different SLAs.

C. Final budget approvals are being discussed.

D. The environment will be shared by several departments.

The web developer has stated that the site must come back online after a hardware failure without administrative intervention.

What is a non-functional requirement?

A. The virtual machine restart priority must be set to High

B. The virtual machine must be automatically restarted after a catastrophic host failure

C. VMware Fault Tolerance (FT) must be enabled for the virtual machine

D. VMware High Availability (HA) must be enabled on the ESXi cluster, which must contain at least 1 spare host

A customer uses servers without internal storage and asks a systems architect to design a solution with a Fiber Channel array and blade servers as options. The customer requires:

1.

Easier server replacement

2.

Booting through HBA or FCoE

3.

Less wasted space

4.

Improved management

5.

Batter reliability

6.

Inexpensive servers

7.

Easier backup processes

Which design element will follow VMware recommended best practices and also meet customer requirements?

A. VMware Virtual SAN

B. Auto Deploy

C. PXE boot

D. Boot from SAN

A company uses Strick Lockdown mode in the design for a new data center, but the vSphere administrator must still allow access to an ESXi host for third-party solutions. How is it possible to override and add trusted users?

A. Use DCUI Access

B. Use Exception Users

C. Use Security Profiles

D. Use Promiscuous Mode