3V0-32.21 Online Practice Questions and Answers

An organization wants to implement a network topology to provide users with a one-way upstream access to the external network.

Which two statements are true for implementing such a network profile type using NSX-T Data Center? (Choose two.)

A. The external network specified in the "Network Policies" tab will be used to assign an external IP to the VM

B. A DNAT rule is created o the Tier-1 router to allow the VM to communicate externally

C. The cloud template must use the "private" network profile type

D. The external network should be left blank in the "Network Policies" tab

E. An SNAT rule is created on the Tier-1 router to allow the VM to communicate externally

A customer wants to design and deploy Workspace ONE Access to provide multi-tenancy for vRA 8.x

deployment.

Which two designs decisions would achieve the customer's requirement? (Choose two.)

Note: SAN stands for Subject Alternative Name.

A. Configure a certificate with multiple SAN entries for Workspace ONE Access.

B. Configure SSL termination on the load balancer for Workspace ONE Access.

C. Configure SSL bridging on the load balancer for Workspace ONE Access.

D. Configure SSL passthrough on the load balancer for Workspace ONE Access.

E. Configure a certificate with a single SAN entry for Workspace ONE Access.

When designing a load-balanced vRealize Operations cluster, which three aspects should an architect consider? (Choose three.)

A. Maximizing node participation in the handling of UI sessions and traffic

B. Providing high availability if any admin or data node fails

C. Reducing the number of certificates that must be managed for the nodes

D. Minimizing node latency in the handling of UI sessions and traffic

E. Simplifying the configuration of End Point Operations (EPOps) agents

F. Providing fault tolerance if any admin or data node fails

Which design decision should an architect make to support continuous availability in vRealize Operations?

A. Each Fault Domain should contain only remote collector nodes.

B. The vROps cluster should be separated into three Fault Domains.

C. Each Fault Domain should consist of primary, witness and remote collector nodes.

D. The vROps cluster should be separated into two Fault Domains.

An architect is designing a new VMware vRealize Cloud Management solution. During the requirements

gathering workshop, the customer made the following comments:

The monthly uptime target of the cloud management solution must be 99.9%.

All components of the cloud management solution must be deployed with a N + 1 redundancy.

When creating the design documentation, how should these requirements be classified?

A. Recoverability

B. Manageability

C. Availability

D. Performance

An architect is completing the physical design for a vRealize Operation (vROps) solution for a customer. The customer has only provided the following information for their existing environment:

500 Virtual Machines 2 VMware vCenter Servers 10 VMware vSphere Horsts 20 Datastores Live data should be stored within the vROps solution for 6 months The RTO for all existing management components is 4 hours The RTO for all existing management components is 1 hour

Which two assumptions could the architect make when sizing the vROps cluster? (Choose two.)

A. The vROps cluster will be configured as High Availability.

B. The RTO of the vROps solution will be 4 hours.

C. The resource profile of a virtual machine will be, on average, 1 vCPU and 2 GB RAM.

D. The minimum data retention within vRealize Operations Cluster will be 12 months.

E. The RPO of the vROps solution will be 1 hour.

An architect is designing the deployment of vRealize Log Insight (vRLI) in their data center. The customer has the following requirements:

vRLI cluster responds to multiple Virtual IP Addresses (VIPs) Each event message received from a VIP is associated with a tag

Which two design decisions would the architect make to achieve the requirements? (Choose two.)

A. Configure a CSV file to use with VIP tags.

B. Configure a list of static tags (key=value) for an integrated load balancer VIP, so that each event message received from a VIP is annotated with a tag.

C. Each node should have at least one network interface on the same subnet as that of a VIP.

D. Configure a list of dynamic tags (key=value) for an integrated load balancer VIP, so that each event message received from a VIP is annotated with a tag.

E. Each node should have at least one network interface on a different subnet as that of a VIP.

An architect is responsible for designing a new Operations Management solution for a customer. The

customer has provided the following information about their existing VMware Software Defined Data

Center (SDDC) environment:

The customer uses a SaaS-Based Service Desk solution.

The existing environment is located across two geographical regions.

In each region, the customer already has deployed a vSphere-based virtual environment that spans two

well connected physical locations.

The customer has recently upgraded all of their licenses to VMware vCloud Suite Advanced subscription.

The customer has already successfully deployed and configured a vRealize Operations 8 solution in each

region.

The customer would like to ensure that:

All vSphere log events must be captured, stored locally and forwarded to a third-party log management

solution to ensure regulatory compliance.

Specific vSphere log event's can be captured within a region, monitored and then trigger alerts direct to the

Service Desk which can then be assigned to regional support teams.

Operations monitoring for all of the VMware SDDC solution can be consolidated into a single user

interface.

Which three recommendations should the architect make to meet the requirements? (Choose three.)

A. Configure vRealize Operations 8.x and vRealize Log Insight 8.x integration.

B. Configure vRealize Operations 8.x and vRealize Log Insight Cloud integration.

C. Deploy vRealize Operations Cloud and configure Federated Analytics.

D. Deploy vRealize Log Insight 8.x and configure the vSphere integration.

E. Deploy vRealize Log Insight Cloud and configure the vSphere integration.

F. Deploy vRealize Operations Cloud and vRealize Log Insight 8.x integration.

An architect is designing a vRealize Log Insight cluster for an organization with the following requirements:

The organization has an external load balancer available to provide load balancing for various

requirements.

Due to budget constraints the organization need to reuse existing environment as much as possible.

What should the architect choose as the load balancing solution for the vRealize Log Insight cluster?

A. Use the integrated load balancer

B. Deploy a new external load balancer

C. Use the existing external load balancer

D. Use both integrated and external load balancers

A customer wants to implement vRealize Suite Lifecycle Manager (vRSLCM) as a part of a new SDDC

deployment.

The customer has two physical data centers and number of branch offices.

The customer has recently purchased Hyper-converged Infrastructure (HCI) hardware that has to be

implemented and configured.

The customer has a target availability Service Level Agreement (SLA) of 99.99%, measured quarterly, for

the management components.

Which recommendation should the architect make to achieve the requirements?

A. Deploy a 3-node vRSLCM cluster on a vSAN stretched cluster

B. Deploy a vRSLCM appliance in one DC and replicate it to the second DC

C. Deploy a vRSLCM appliance on a vSAN stretched cluster

D. Deploy a vRSLCM appliance on a vSAN cluster