220-010 Online Practice Questions and Answers

Which network configuration is often used to isolate network traffic?

A. FTP

B. SSH

C. VLAN

D. TCP

You are managing a Vblock® System and have been asked to prove the Vblock® System is using the most recent firmware version across all components in their environment.

Which VCE VisionTM Intelligent Operations feature would you use to accomplish this task?

A. Health Monitor

B. Compliance Checker

C. System Library

D. Adapter for vCenter Operations Manager

An existing customer wants to add external IP addresses to its management pool. Which element manager would you recommend?

A. Data Center Network Manager

B. Unisphere

C. VCE VisionTM Intelligent Operations

D. UCSM

What information is needed to configure the VSM-to-vCenter communication (SVS connection) for a Nexus 1000V? (Choose two)

A. The data center name in the vCenter server

B. The vCenter server IP address/FQDN

C. The control and packet VLAN Port Group name

D. The UUID of the physical server running VMware ESXi

A business user is deploying a new application on a virtual machine and requires this application to be isolated from the rest of the network due to compliance requirements. Your security team will implement a firewall and requires you to set up a dedicated network.

Which three tasks are part of the configuration steps? (Choose three)

A. Add the VLAN to the appropriate service profile.

B. Add the VLAN to the appropriate System Policy.

C. Create the VLAN on the Fabric Interconnect.

D. Create the VLAN on the VMware NSX virtual switch.

E. Create the VLAN on the Nexus 1000V virtual switch.

You are deploying a new business critical application that cannot have any down time. The new business application does not support clustering and you decide to implement VMware Fault Tolerance. Which two configurations must be in place to support the business application? (Choose two)

A. The virtual machine is configured with 1 vCPU.

B. The virtual machine is configured with raw device mappings for storage.

C. The ESXi host is configured with a data store heartbeat for fault tolerance.

D. The ESXi host is configured with a kernel port for fault tolerance logging.

You are adding a new VLAN to your Vblock® System 340. You create the VLAN on both your Nexus 5000 series switches.

Which two steps are required before this VLAN should be used? (Choose two)

A. Add the VLAN to an untagged port channel.

B. Add the VLAN to the port channel between the Nexus 5000 switches and Fabric Interconnects.

C. Add the VLAN to the port channel joining the Nexus 5000 switches.

D. Create a new port channel between the Nexus 5000 switched and Fabric Interconnects with the new VLAN.

You need to clean up your UCS environment. You discover that you have old UCS software bundles in your UCS system. You want to delete these bundles from the system, but not create faults.

Which action should you perform prior to deletion?

A. Delete any host firmware packages that use those bundles.

B. Change your reboot policy to User Ack.

C. Ensure that there are no pending activities.

D. Ensure that no components have this firmware in their backup versions.

While troubleshooting a VCE VisionTM Intelligent Operations problem, you notice that the rsyslog file was empty.

Which action should you perform first?

A. Start an SSH session to the VCE VisionTM software system library and verify the FMagent status.

B. Log on to the vSphere Web Client and verify that the VCE Vision software system library was installed.

C. Start an SSH session to the VCE Vision software system library and verify the service status.

D. Log on to the Vision GUI, and run a compliance report.

You have a problem with a Vblock® System 340 VNX array. While talking with support, they request that you generate an SP Collect and send it to them.

How do you collect this data?

A. Log into USM and send diagnostics data to VCE VisionTM Intelligent Operations.

B. Log into USM, click on Diagnostics and Capture Diagnostics Data.

C. Log into USM, generate SP Collect, and get SP Collect for each SP.

D. Log into USM, Capture Diagnostic Data, and get capture diagnostic data.