E20-517 Online Practice Questions and Answers

A customer is planning to migrate data belonging to two applications (A and B) from an older array to a new Symmetrix VMAX. Both migrations will run in parallel. However, it is necessary to transfer data from application A (session A) as fast as possible. The data from application B (session B) can be transferred at a slower rate.

Which settings should be used to run the two sessions?

A. The pace of session A should be set to 0. The pace for session B should be set to 9.

B. The pace for session A should be set to 9. The pace for session B should be set to 0.

C. Session A should be assigned to a Fibre Channel director with a ceiling setting of 100. Session B should be assigned to a different director with a ceiling value of 10.

D. Session A should be assigned to a Fibre Channel director with a ceiling setting of 10. Session B should be assigned to a different director with a ceiling value of 100.

If the default values in Unisphere for VMAX are not changed, which value will trigger a fatal alert for Device Pool Free Space?

A. 95

B. 98

C. 99

D. 100

What are the characteristics of the Initiator groups on Symmetrix storage arrays running Enginuity 5876?

A. Contains fibre WWNs or iSCSI names, an initiator may belong to only one group, can be cascaded one deep.

B. Can be cascaded one deep, either fibre WWNs or iSCSI names, an HBA may belong to many groups.

C. HBAs belongs to one group, Contains fibre WWNs or iSCSI names, can be cascaded more than one deep.

D. Contain up to 32 entries, an initiator may belong to many groups, can be cascaded one deep.

What state will the target device be in when you use the -precopy option during a TimeFinder/Clone Create operation?

A. Not Ready

B. Read Write Enabled

C. Read Only Enabled

D. Write Disabled

When using autoprovisioning on a Symmetrix VMAX array, which type of objects can be cascaded?

A. Initiator Group and Storage Group

B. Port Group and Storage Group

C. Initiator Group and Masking View

D. Masking View and Port Group

Which operations are permitted as part of the Open Replicator DM license?

A. Cold Pull, Hot Push, Cold Push

B. Hot Pull, Cold Pull, Hot Push, Cold Push

C. Hot Pull, Hot Push, Cold Push

D. Cold Pull, Hot Push, Hot Pull

Which feature allows the contents of a BCV to remain unchanged during and after a restore operation, even while the BCV and the standard are synchronized?

A. Full Establish

B. Incremental Restore

C. Protected Restore

D. symmir Restore

A Symmetrix VMAX 20K customer is planning to use virtual provisioning encapsulation to encapsulate LUNs from an external array. What objects are created when using SYMCLI to perform the encapsulation?

A. eDisk and Symmetrix device

B. eDisk, data device and thin device

C. eDisk and external disk group

D. External disk group, data device and thin device

What is the maximum number of concurrent differential TimeFinder/Clone sessions that can be created from a single source device?

A. 8

B. 10

C. 12

D. 16

A Symmetrix VMAX customer wants the ability to perform at least four concurrent FAST swaps.

What is the minimum required DRV configuration?

A. 4 DRVs equal to or larger than the largest device size

B. 4 DRVs for every device size in the configuration

C. 8 DRVs equal to or larger than the largest device size

D. 8 DRVs for every device size in the configuration